When using a co2 laser engraving machine to engrave materials in industrial production and processing, in order to ensure the accuracy of engraving and production efficiency. It is necessary to maintain and clean the co2 laser engraving machine frequently. Let's talk about the maintenance and cleaning methods of the co2 laser engraving machine:
1.First of all, make sure the guide rails are clean. Because the function of the guide rail is mainly to ensure the engraving accuracy of the engraving head and the stability of the engraving head during the movement of the co2 laser engraving machine, it is necessary to keep the guide rail clean and free from any stains and other obstacles.
2. Always pay attention to the tightness of the parts and the joints between the various components of the co2 laser engraving machine during the movement, if it is found to be loose. It will cause the co2 laser engraving machine to malfunction or the engraving accuracy is not accurate. At this time, the tightness of each part must be tightened to ensure the normal operation of the machine.
3. Always pay attention to whether the lubricating oil reserve of the machine is sufficient. If the lubricating oil reserve is insufficient, the friction force will increase during the movement of the machine, which will cause the machine to fail to operate normally and damage the workpiece. Therefore, when the oil is insufficient, The amount of lubricating oil should be replenished in time.
4. It is necessary to clean up the impurities in the exhaust system of the co2 laser engraving machine in time. The co2 laser engraving machine will smoke during the working process, so if there are impurities in the components of the exhaust system, it will affect the normal operation of the machine.
5.To ensure that the CO2 laser engraving machine cooling system in the circulation of sufficient water, because the CO2 laser engraving machine in the engraving operation will generate a lot of heat, the laser tube will cause damage, and the role of cooling water circulation is to cool the laser tube, so we must ensure that the circulation of water is sufficient to avoid damage to the CO2 laser engraving machine.