Mingxing 1610 CO2 laser engraver cutter standard with 1600*1000mm working area, suit for the most nonmetal material engrave cut work. MX-1610 laser cutter with front back feed material, suit feed material width 1600 mm, but length longer than 1000 mm, as the machine back can be open. With optional aluminum blades workable and honeycomb worktable, suit for different material engrave cut work.
You should choose single laser configuration if your primary needs is processing work pieces larger than half of the working table.
Dual laser systems include two laser heads, allowing you to cut or engrave twice as much material in the same amount of time. Each laser has an independent set of laser source, optics and power supply which you can enable or disable according to processing needs. The spacing between the heads can be adjusted at any time using just a screwdriver.
130W CO2 laser is the most cost effective choice for cutting (can cut acrylic up to 1" in thickness). 150W CO2 laser is best suitable for cutting ultra-thick materials (can cut acrylic up to 1-1/4" in thickness).
With servo motors from world’s leading supplier, the laser head of the MX-1610 can move very fast at extremely high resolution. A step size of just 6.25μm gives the machine a resolution of over 4000DPI. In arbitrary-direction cutting, the head can accelerate at 2 m/s2 (0.2G). The MX-1610 with high quality stepper motors sacrifices only a small amount of performance.